Move source files into src

16 files changed, 0 insertions, 332 deletions

diff --git a/_projects/assixt.md b/_projects/assixt.md
deleted file mode 100644
index 57db5b0..0000000
--- a/_projects/assixt.md
+++ /dev/null
@@ -1,55 +0,0 @@
----
-layout:  project
-title:   Assixt
-date:    2017-07-01T00:00:00Z
-langs:   Perl 6
-license: GPLv3
-repo:    https://gitlab.com/tyil/perl6-app-assixt
----
-
-`assixt`, or `App::Assixt`, is a Perl 6 module which I wrote in order to make
-it easier to write more Perl 6 modules. I also used it as a good project to get
-better with Perl 6 with. Nowadays, it's doing much more than I anticipated at
-the start of the project. I've turned it into a more complete solution for Perl
-6 projects in general.
-
-`assixt` can create new Perl 6 module skeletons, complete with `.gitignore`,
-basic CHANGELOG, Travis and GitLab CI configurations and more. It will also
-keep version numbers used accross your project in sync, create correct
-distribution tarballs and allows you to upload them to [CPAN][cpan] directly
-from the command line.
-
-I've given a presentation on this project at the 14th Dutch Perl Workshop, and
-the slides are available [on the Slides section of my site][slides] as well.
-
-## Installation
-
-To install `assixt`, you will need to have Perl 6 installed, and `zef`
-available as well. I recommend you use [Rakudo Star][rakudo] releases for
-these. If you're using GNU+Linux, you might want to take a look at
-[LoneStar][lonestar].  This is a Bash program that will fetch, unpack and
-compile Rakudo Star Perl 6 for you, including `zef` and a number of other
-common modules.
-
-If you have Perl 6 installed, simply invoke `zef` to install the module
-containing `assixt`:
-
-```sh
-zef install App::Assixt
-```
-
-## Support and feedback
-
-Check out `assixt --help` for an overview of what you can do with it. You can
-also check the README on the repository to get a more extensive overview of the
-possibilities, and some examples on how to use it.
-
-You can also create issues on the repository if you are still having trouble,
-or perhaps even found a bug. The `#perl6` channel on Freenode might also be of
-assistance, as I am almost always available in that channel (so long as I'm
-awake). You can report feedback through issues or IRC as well.
-
-[cpan]: https://www.cpan.org/
-[slides]: /slides/
-[lonestar]: /projects/lonestar/
-[rakudo]: https://rakudo.org/
diff --git a/_projects/config.md b/_projects/config.md
deleted file mode 100644
index e3af2e9..0000000
--- a/_projects/config.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   Config
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/p6-Config
----
diff --git a/_projects/dist-helper.md b/_projects/dist-helper.md
deleted file mode 100644
index 73cab90..0000000
--- a/_projects/dist-helper.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   Dist::Helper
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-dist-helper
----
diff --git a/_projects/io-path-dirstack.md b/_projects/io-path-dirstack.md
deleted file mode 100644
index 240b206..0000000
--- a/_projects/io-path-dirstack.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   IO::Path::Dirstack
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-io-path-dirstack
----
diff --git a/_projects/irc-client-plugin-github.md b/_projects/irc-client-plugin-github.md
deleted file mode 100644
index ef5f6d8..0000000
--- a/_projects/irc-client-plugin-github.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   IRC::Client::Plugin::Github
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-IRC-Client-Plugin-Github
----
diff --git a/_projects/irc-client-plugin-ignore.md b/_projects/irc-client-plugin-ignore.md
deleted file mode 100644
index ce4fc17..0000000
--- a/_projects/irc-client-plugin-ignore.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   IRC::Client::Plugin::Ignore
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-IRC-Client-Plugin-Ignore
----
diff --git a/_projects/irc-client-plugin-nickserv.md b/_projects/irc-client-plugin-nickserv.md
deleted file mode 100644
index b9363a5..0000000
--- a/_projects/irc-client-plugin-nickserv.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   IRC::Client::Plugin::NickServ
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-IRC-Client-Plugin-NickServ
----
diff --git a/_projects/irc-client-plugin-urltitle.md b/_projects/irc-client-plugin-urltitle.md
deleted file mode 100644
index 36a9e83..0000000
--- a/_projects/irc-client-plugin-urltitle.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   IRC::Client::Plugin::UrlTitle
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/perl6-IRC-Client-Plugin-UrlTitle
----
diff --git a/_projects/lonestar.html b/_projects/lonestar.html
deleted file mode 100644
index fd88975..0000000
--- a/_projects/lonestar.html
+++ /dev/null
@@ -1,83 +0,0 @@
----
-layout:  project
-title:   LoneStar
-date:    2018-07-01T00:00:00Z
-langs:   Bash
-license: AGPLv3
-repo:    https://git.tyil.nl/tyil/lonestar
----
-
-{% markdown %}
-LoneStar is a simple program, written in Bash, to download and install [the
-Rakudo Star Perl 6 distribution](https://rakudo.org). As of the moment of
-writing this program, Rakudo Star Perl 6 binaries cannot easily be moved around
-on the OS, making regular installation methods more troublesome than they ought
-to be. To deal with the installation issue, I wrote LoneStar, to just take care
-of it. I chose to use Bash to ensure it can run on a wide range of GNU+Linux
-systems without much trouble.
-{% endmarkdown %}
-
-{% markdown %}
-## Installation
-
-LoneStar is given a `Makefile` which can take care of installation. However, it
-does not _need_ to be installed if you just want to try it out first. I would
-recommend installation anyway, in order to make easy use of the `init`
-subcommand (which will update you `$PATH` to include the Perl 6 executables for
-you).
-
-You can clone the repo using git, and use `make` to install it:
-{% endmarkdown %}
-
-{% highlight sh %}
-cd "$(mktemp -d)"
-git clone https://gitlab.com/tyil/lonestar .
-make DESTDIR=/usr/local install
-{% endhighlight %}
-
-{% markdown %}
-Some shells will require you to _rehash the $PATH_. On Bash, this is done
-using `hash -r`. Zsh users should run `rehash`. Other shell users may have to
-consult their respective shell's manual. With newer shells, this is oftentimes
-not necessary, though.
-
-## Usage
-
-You can invoke `lonestar` without any parameters to get a list of subcommands
-it will accept, together with optional parameters. To just get the latest
-Rakudo Star Perl 6 distribution installed, use the `install` subcommand.
-{% endmarkdown %}
-
-{% highlight sh %}
-lonestar install
-{% endhighlight %}
-
-{% markdown %}
-Once it has been installed, you can update your `$PATH` with `init`.
-{% endmarkdown %}
-
-{% highlight sh %}
-eval $(lonestar init)
-{% endhighlight %}
-
-{% markdown %}
-This will make sure the directory containing the `perl6` program will be
-searched whenever you want to run a Perl 6 program. It also includes the
-directory that contains all executable modules that have been installed.
-Consequentally, this will make the module installer `zef` available to you.
-
-You can confirm whether Perl 6 works by retrieving the current version.
-{% endmarkdown %}
-
-{% highlight sh %}
-perl6 --version
-{% endhighlight %}
-
-If this command did not fail, you should be good to go!
-
-{% markdown %}
-## Issues and feedback
-
-If you have any issues or feedback on this program, please contact me via any of
-the channels listed on the homepage of my blog.
-{% endmarkdown %}
diff --git a/_projects/mpd-client.md b/_projects/mpd-client.md
deleted file mode 100644
index eea593c..0000000
--- a/_projects/mpd-client.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   MPD::Client
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/p6-MPD-Client
----
diff --git a/_projects/musashi.md b/_projects/musashi.md
deleted file mode 100644
index e59c8e9..0000000
--- a/_projects/musashi.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   Musashi
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://github.com/scriptkitties/musashi
----
diff --git a/_projects/pod-to-pager.adoc b/_projects/pod-to-pager.adoc
deleted file mode 100644
index ca1af10..0000000
--- a/_projects/pod-to-pager.adoc
+++ /dev/null
@@ -1,102 +0,0 @@
----
-layout:  project
-title:   Pod::To::Pager
-date:    2018-07-15T00:00:00Z
-langs:   Perl 6
-license: AGPLv3
-repo:    https://gitlab.com/tyil/perl6-pod-to-pager
----
-:toc: preamble
-
-`Pod::To::Pager` is a Perl 6 project to generate prettier output from Perl 6
-Pod structures. By default, Perl 6 ships with a very simple Pod formatter,
-which can be used by calling `perl6 --doc <file>`. You can specify a doc
-formatter by giving it as argument, like `perl6 --doc=Text <file>`. This will
-use the `Pod::To::Text` module to format the output, which is also the default.
-
-But, I wanted something prettier, something I would actually like reading if I
-were looking for documentation on a module. Most people are familiar with UNIX
-man pages (or at least, most people who will read, this I hope). So I wanted to
-create something similar. To get used to Perl 6 Pod, I just tried making simple
-text, with some coloring, as this is easier than also trying to learn how man
-pages are to be created.
-
-And so, `Pod::To::Pager` was born. I've received some feedback from the Perl 6
-community, and included some of it in to the module. It comes with a `p6man`
-utility, which is very much like `p6doc`. It calls the formatter, and calls a
-pager to show the result. It looks very much like the UNIX man pages, and the
-pager lets you read it like one. It's basically an on-the-fly generated man
-page.
-
-== Installation
-
-To install the module, be sure to have Perl 6 and `zef`, the Perl 6 module
-manager, installed on your system. You can then call `zef install` to have it
-download, test, and install the module:
-
-[source,sh]
-----
-zef install Pod::To::Pager
-----
-
-== Usage
-
-Once installed, you can use the module in many ways. You can call it as a Pod
-formatter on Perl 6 itself:
-
-[source,sh]
-----
-perl6 --doc=Pager lib/Some/Module.pm6
-----
-
-This will render the document on `STDOUT`, and display it in your terminal. If
-it doesn't support scrollback, there's a high chance you can't see the top part
-of it. To solve that, you can use a pager, like `less`:
-
-[source,sh]
-----
-perl6 --doc=Pager lib/Some/Module.pm6 | less
-----
-
-This will keep it possible to scroll through the output, until you press `q` to
-quit the pager.
-
-=== p6man
-
-Since the last form is the way it was intended to be used (hence the *pager* in
-`Pod::To::Pager`), there's a utility bundled with the module to make such use
-easier. Inspired by the existence of `p6doc`, it's called `p6man`. It will use
-`less` as the pager on GNU+Linux if possible, otherwise it will fall back to
-`more`. On Windows, it will just use `more`. You can call it with either a
-(relative) file path, or a module name:
-
-[source,sh]
-----
-p6man lib/Some/Module.pm6
-p6man App::Assixt
-----
-
-For the latter variant to work, the module must be installed locally.
-
-=== In Perl 6 programs
-
-You can also use it directly in Perl 6 programs. This allows you to change
-behaviour of the formatting process, or render the program's own documentation
-with this formatter's output. To do that, `use` the module, and call the
-`format` method on the formatter class:
-
-[source,perl6]
-----
-use Pod::To::Pager;
-
-say Pod::To::Pager($=pod);
-----
-
-This will render the program's own Pod structure, formatted using
-`Pod::To::Pager`, and print it to `STDOUT`.
-
-== Feedback
-
-If you have any feedback, please reach out to me on `#perl6` on IRC, or create
-an issue on the repository.
-
diff --git a/_projects/scriptkitties-overlay.md b/_projects/scriptkitties-overlay.md
deleted file mode 100644
index cede5a6..0000000
--- a/_projects/scriptkitties-overlay.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   Scriptkitties Overlay
-date:    2017-01-01T00:00:00Z
-langs:   Bash
-license: GPLv2+
-repo:    https://c.darenet.org/scriptkitties/overlay
----
diff --git a/_projects/string-fold.md b/_projects/string-fold.md
deleted file mode 100644
index 60f9cc3..0000000
--- a/_projects/string-fold.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   String::Fold
-date:    2017-01-01 00:00:00
-langs:   Perl 6
-license: GPLv3
-repo:    https://gitlab.com/tyil/perl6-string-fold
----
diff --git a/_projects/subbot.md b/_projects/subbot.md
deleted file mode 100644
index 79eb26a..0000000
--- a/_projects/subbot.md
+++ /dev/null
@@ -1,7 +0,0 @@
----
-title:   SubBot
-date:    2017-01-01 00:00:00
-langs:   Lua
-license: GPLv2
-repo:    https://c.darenet.org/tyil/subbot
----
diff --git a/_projects/tachikoma.md b/_projects/tachikoma.md
deleted file mode 100644
index beb03d0..0000000
--- a/_projects/tachikoma.md
+++ /dev/null
@@ -1,8 +0,0 @@
----
-title:   Tachikoma
-date:    2017-01-01 00:00:00
-langs:   Ruby
-license: GPLv3
-repo:    https://c.darenet.org/scriptkitties/tachikoma
----
-